Leatherman 830846 Skeletool Multitool for sale

Leatherman 830846 Skeletool Multitool for sale

-Backstory-
One of many criterion to get a great multitool is versatility, and for the longest time I figured that meant more blades, attachments, and enhancements. While that's partially true, that includes a more substantial, heavier footprint. Once i finally upgraded to the heavyweight behemoth that is the Leatherman 830160 Surge Pocket Multitool with Leather Sheath and located myself leaving it at home more and more often to its weight, I realized something was wrong.

The truth is most blades/tool-blades seldom see the light of day outside of camping, and the added size and dimenstions only actually discourage daily carry. Barring camping or novelty, when was the very last time you used your pocket-knife's can-opener? Wood saw? Awl? Corkscrew?? Is there anything you probably have scissors for your can not be accomplished using a blade or wire cutter? Would you unconditionally NEED eyeglass-sized screwdrivers you 24-7?

Most daily applications is usually accomplished with a simple blade, a couple of drivers, a great group of pliers, and a bottle opener ;). Which is what the Skeletool standard and CX multitools offer.

-Carryability-
Why is the Skeletool CX great isn't the *number* of tools, it does not take *versatility* of its few, well planned tools, making it possible for a 5 ounces overall weight, slim form-factor, and never one but two carry clips. The typical side-clip is removable (thought cannot be positiioned in any positions around the tool) as you move the carabiner happens to be a great deal more useful than I'd imagined -- I find myself hanging it on my belt loop most of the time, keeping my belt clear of pouches and my pockets comfortably empty. This negates the advantages of a holster, though you will find versions with the tool which come with you should you desire it.

-The Blade-
Similar to modern multitools, the Blade rotates open easily, one-handed, without needing to open the tool itself. This is a Need to have feature to have an Daily Carry tool, and feels right in your house within the Skeletool. The two.5 inch blade is often a perfectly functional length for everyday use (again, it is deemed an EDC tool, not just a survival knife, and anything longer would only allow it to be heavier). The CX model comes with an upgraded 154CM steel blade and it is *reason enough* to find the CX in the standard model - 154CM can be a much better, newer steel which holds is edge Wonderfully while providing moderate corrosion resistance and takes activities like an excellent ceramic stone to sharpen. During the last year I've used it for many techniques from prying and scraping to box cutting and (in a very pinch) cooking, and despite never having sharpened it when the tip is still there (and that is saying a lot for my knives) as well as it still plenty sharp. The blade's liner lock does a noticeably firm job of holding the blade in situ with NO WOBBLE. Quality! When closed, the blade is located in place by way of a blade-retention bump within the liner lock that mates with one of the skeletonizing holes on the base of the blade. Both Skeletools I've used has a ramp turn over the foot of the blade near the joint, automatically depressing the retention-bump and allowing safe closure on the blade. One reviewer has proven that his Skeletool CX won't have this ramp, forcing him to grind journey bump or risk placing him thumb at an increased risk whenever he closed the blade. It really is yet unclear that explains why his knife didn't find the ramp.

-Half Serrated vs. Full Straight Blade-
NOTE: In mid 2009, Leatherman added half-length blade serrations to standard model and REMOVED them in the CX model. Confusingly, the model numbers are not updated to enhance the newest configurations. Some trusted online stores may still possess the 'old version' still in inventory, but because model numbers are indifferent, there isn't any means of knowing what you'll receive. I contacted Leatherman about it this also may be the reply I received:

"Thank you for your email plus your fascination with Leatherman Tools. Originally our Skeletool has a "straight blade", along with the Skeletool CX a "combo blade". The Skeletool CX incorporates a higher grade of steel in their blade the ones in the `knife world' delivered to us, and stated we should avoid using the combo blade with 154cm material. Therefore, in mid year of not too long ago, we launched a design change. ... All Current types of the Skeletool CX will have the straight blade. All current types of the Skeletool possess the combo blade. ... There are a few retailers available, who have both in inventory. We did not get a new item numbers after we made the blade change. Unfortunately, you'll have to just verify who may have what available."

-Bit Driver-
This can be a tool to change all of them and something in the reasons the Skeletool is capable of doing so much yet still be so thin and light-weight. You can carry two double-sided bits together with you (one in the driver and something in the spare bit slot). I acquired the Leatherman 934870 40 Bit Assortment with Nylon Sheath bit kit with my Skeletool and located that this two bits I use they are the [#0 & #3] Philips bit, plus the [#1-2 & 3/16] Philips & flat-blade combo bit. I can attack any just about any screw-head and pry at anything without risking harm to the blade. The rest of the bits are stowed in my backpack.

A word of warning: be sure your spare bit slot is tight before clipping your Skeletool onto your pack while hiking. Someone of mine had his spare bit drop out! Nothing the aforementioned Leatherman 934870 40 Bit Assortment with Nylon Sheath couldn't replace, and you still may want to bend it somewhat to tighten it up. Mine was fine, which means this might not be an issue available for you.

-Pliers-
The truth is that, the jaws undoubtedly are a little thinner than I'd like, but have so far delayed to everything I've thrown at it (including an accident with a Dremmel). Furthermore , it can have been nice in the event the integrated wire cutters were a little harder while they developed a little "bump" after nibbling by way of a particularly tough strip of metal. For a time there was clearly noticeable resistance when closing the pliers, but after some time it's worn itself the government financial aid. My only lasting complaint is the fact that, despite being so thin (3/16ths" at its widest point) the end is simply a tad too blunt to adjust to inside AR-15's firing-pin retaining-pin recess. It'd are actually nice if the "needle-nose" was a extra "needle" ;)

-Bottle Opener-
A particular nice to obtain. Am I embarrassed to admit this one thing gets the maximum amount of use as the remaining portion of the tools combined? Nah ;)

Also, when I contacted Leatherman about the mid 2009 blade change, I had been fortunate enough to have a full directory all Skeletool models. Maybe it'll assist you, not. Here you go anyway:

Skeletool (Standard) - manufactured that has a combo blade after mid '09
830845: 420HC No sheath, box packaging
830846: 420HC No sheath, Clam packaging
830847: 420HC No sheath, Gift Tin packaging
830865: 420HC Nylon sheath, Gift Tin packaging
830948: 420HC Nylon sheath, Box packaging

Skeletool CX - manufactured that has a straight blade after mid '09
830849: 154CM No sheath, box packaging
830850: 154CM No sheath, Clam packaging
830851: 154CM No sheath, Gift Tin packaging
830866: 154CM Nylon Sheath, Gift Tin packaging
830950: 154CM Nylon Sheath, box packaging


So that's it. Do not let the Skeletool's small size and show list deter you; The Skeletool is usually an extraordinary EDC tool!